Press stop time pad. 5. set stop time, Start oven – Whirlpool RBS277PD User Manual
Page 27
27
PRESS
YOU SEE
TEMP
F
BAKE
PRESS
YOU SEE
STOP
TIME
F
BAKE
STOP
TIME
PRESS
YOU SEE
HR
MIN
F
BAKE
STOP
TIME
(example shows 2 o’clock
stop time)
(example shows Bake at 375°F
[or 191°C])
PRESS
YOU SEE
START
ENTER
5 SEC
ON
F
BAKE
HEAT
D
TIME
TIME
COOK
U S I N G Y O U R O V E N
3. Set temperature (optional).
Do this step if you want to set a tempera-
ture other than 350°F. Press
▲
to raise
the temperature or
▼
to lower the
temperature in 5°F amounts. Use these
pads until the desired temperature shows
on the small display. (If the Temp pads
are held down the temperature will
change faster.)
4. Press Stop Time pad.
5. Set stop time.
Press the “up” (
▲
) or “down” (
▼
) pad(s)
until the correct time shows on the display.
Example at right shows a desired stop
time of 2 o’clock. This provides a 2-hour
cook time (the difference between the
time of day and the stop time).
6. Start oven.
NOTES:
•
You can change the temperature or
time settings any time after pressing
the Start/Enter pad by repeating Steps
2 through 5.
•
The display will show “door” and the
heating elements will not heat if the
door is open when you try to cook with
bake/roast or convection cook.
•
When you press the Start/Enter pad,
the display will count down the baking/
roasting time in hours and minutes (if
cook time is more than 1 hour) or in
minutes and seconds (if cook time is
less than 1 hour).
continued on next page