Whirlpool RBS277PD - Manual (Page 44)

44
To replace:
1. Fit hinge arms into slots in frame. Push
in at lower corners to insure that hinge
arms are fully engaged.
2. Open the door all the way.
The oven lights
The oven lights will come on when you open
the oven door. To turn the lights on when
the oven door is closed, press the Oven
Light Pad
LIGHT
on the control panel.
To replace an oven light:
1. Disconnect appliance at the main power
supply. Make sure the oven is cool before
replacing the light bulb.
2. Remove the glass bulb cover in the back
of the oven by screwing it out counter-
clockwise.
3. Remove the light bulb from its socket.
Replace the bulb with a similar 125-volt,
15-watt appliance bulb.
3. Remove the door removal pins from
each hole.
4. Close the door.
NOTE: If the door does not operate freely,
you have not installed it properly. Repeat
Steps 1-4.
4. Replace the light bulb cover by screwing
it in clockwise. The light bulb cover must
be in place when using the oven. The
cover protects the bulb from breaking and
from high oven temperatures.
5. Reconnect appliance at the main power
supply.
NOTE: The oven lights will not work during
the Self-Cleaning cycle.
C A R I N G F O R Y O U R O V E N