Windsor Saber Compact 16 - Manual (Page 9)

English
9
1 OFF
2 Scrubbing/vacuuming operation Wet cle-
aning of floor and vacuuming of dirty wa-
ter.
3 Wet scrubbing Wet cleaning of floor, al-
lowing detergent to take effect.
4 Vacuuming up dirty fluid.
5 Polishing the floor without applying li-
quid.
To improve the vacuuming result on tiled
floors the squeegee tool can be turned to an
oblique position of up to 5°.
Î
Release the wing nuts.
Î Turn the squeegee tool.
Î Tighten the wing nuts.
If the vacuum result is unsatisfactory the
angle of the straight squeegee tool can be
modified.
Î
Release the wing nuts.
Î Tilt the squeegee tool.
Î Tighten the wing nuts.
Î Turn the running gear to the front with
your foot.
Î Reducing the speed: Turn the wheel in –
direction.
Î Increasing the speed: Turn the wheel in
+ direction.
Î Insert the looped end of the extension
cable in the strain relief hook.
Î Plug in the mains plug.
Cleaning programs
Setting the squeegee
Oblique position
Angle
1
2
3 4
5
Setting the advance speed
Connecting to the power supply