Windsor Saber Compact 16 - Manual (Page 10)

10
English
Î Turn the running gear to the back with
your foot.
Î Turn the program selection switch to the
desired cleaning program.
Î Set the water quantity according to the
degree of dirt accumulation and the floor
covering.
Î Lower the squeegee tool.
Î Turn on the brushes by pulling the con-
trol handle.
ṇ
Warning!
Risk of damage to the floor covering. Do not
operate the machine on the spot.
Î Turn the water quantity control button to
the closed position.
Î Drive the machine forwards for another
1-2 m to draw off residual water.
Î Turn the program selection switch to
"OFF".
Î Raise the squeegee tool.
Î Turn the running gear to the front with
your foot.
Î Disconnect the main plug.
ṇ
Warning!
Risk of deformation of brushes – when par-
king the machine, relieve the pressure on
the brushes by turning the running gear to
the front
Note
If the dirty water reservoir is full the float clo-
ses the suction channel. The suction opera-
tion is interrupted. Empty the dirty water
reservoir.
ṇ
Warning
Please observe the local regulations regar-
ding the wastewater treatment.
Î
Take the dirty water drain hose from the
support and lower above a suited collec-
tion device.
Î Drain water by drain hose cover remo-
ving.
Î The rinse the dirty water reservoir with
clear water.
Î Release the coupling at the upper end of
the fill level display.
Î Lower the hose for the fill level display
into a suitable collector and drain off li-
quid.
Î Engage the coupling on the machine
again.
Î If you want to transport the machine on a
vehicle secure it from slipping.
To reduce the required space the push
handle can be turned to the front:
Î
Release the star grips of the push handle
fastening.
Î Turn the push handle to the front.
ƽ
Danger
Risk of injury. Turn the program selection
switch to "OFF" and disconnect the mains
plug before performing any work on the ma-
chine.
Î
Drain and dispose of dirty water and ex-
cess fresh water.
Cleaning
Shutting down and parking the ma-
chine
Emptying the Dirty Water Reservoir
Emptying the fresh water tank
Transport
Maintenance and care