White Rodgers 1F94W-71 - Manual (Page 33)

33
QUESTIONS AND ANSWERS
1. How can I permanently change a part of
my program?
Press VIEW
PRGM
until you reach the time/tem-
perature schedule you want. Then press
or and TIME
FWD
and TIME
BACK
to change
the program (remember, when you change
the time, you are changing it for both the
heating and cooling programs). See PRO-
GRAMMING YOUR THERMOSTAT.
2. How can I have no change in tempera-
ture from one time period to another?
Simply select the same temperature for
each consecutive time period. For example,
you may select the same COOL A tempera-
ture for period 2 as you did for period 1,
which means the temperature will not change
from COOL A when period 2 begins. See
PROGRAMMING YOUR THERMOSTAT.
3. How can I finish my programming if the
display has already changed to time/
temperature?
During programming, if no buttons are
pressed for five minutes, the thermostat will
enter the HOLD mode and maintain a con-
stant temperature. The display will change
to the time/temperature mode. To resume
programming, press VIEW
PRGM
until you return to
the point where you stopped programming.
Then you may continue to program the
thermostat normally. If you want to stop