White Rodgers 1F94W-71 - Manual (Page 27)

27
EXAMPLE:
This display window shows that for Monday’s
heating/cooling period 1, the start time is
5:00 AM, and 70
°
is the programmed tem-
perature (this example reflects factory pre-
programming, where 70
°
is the HEAT A
temperature).
3. To change the displayed start time to your
selected start time for Monday’s period 1,
press TIME
FWD
or TIME
BACK
until your selected time
appears. The time will change in 15 minute
increments. The time you select will be
the start time of Monday’s period 1 for
both heating and cooling.
4. If the temperature displayed is not the HEAT
A, B, C, or D temperature you want for
Monday’s period 1, press
or (if
you continue to press or , the
display will alternately display the HEAT A,
B, C, or D temperatures you previously
selected).
5. After selecting the desired heating tempera-
ture for heating/cooling Monday’s period 1,
press VIEW
PRGM
. The currently programmed start
time and heating temperature for Monday’s
heating/cooling period 2 will be displayed.
6. Repeat steps 3 and 4 to select the start time
and heating temperature for Monday’s heat-
ing/cooling period 2.
7. Repeat steps 3 through 6 for Monday’s
heating/cooling periods 3 and 4.