Set up menu - audio – Wintal DVDRX160 User Manual

Page 37

VIDEO OUTPUT FORMAT

In the General Setting menu, use the

▲ or ▼ button to

move the cursor, select the Video Output Format item and
press the SELECT button.
Select the Progressive or Interlace option for video scan
output mode, and press the SELECT button to conﬁ rm.
Th

is function can do by pressing PSCAN button on the

remote controller.

NOTE: Only use progressive with a compatible TV. Failure to do so
will cause loss of picture. ( If this happens, press ‘PSCAN’)
If unsure consult your TV manual.

Set Up Menu - Audio

DOWN MIX
Th

e unit can set the analog audio inputer output at 2-CH or 5.1-CH

stereo surround.

Enter the play setting menu, use the

▲ or ▼ button to select

downmix, and press the SELECT button.

Use the

▲ or ▼ button to select 2-CH or 5.1-CH, and press the

SELECT button to conﬁ rm.

NOTE: Only use 5.1 ch if you hav connect to a surround amp via
analog cables.

S/PDIF OUTPUT
Th

is unit has digital audio outputs. You can enjoy better qulity

audio through an appropriate ampliﬁ er with a digital audio
decoder. (such as DOLBY DIGITAL or DTS by connecting a digital cable. Optical or digital coax.

Enter the play settings menu, use the

▲ or ▼ button to select SPDIF Output item, and press the SELECT button to drop down a

menu.
Use the arrow buttons to select an option (RAW, LPCM), and press the SELECT button.
Press the RETURN button to return to the upper level menu and set up other items.

NOTE: Refer to your ampliﬁ ers manual for information on what digital format your amp requires.

■

2.
3.