Wintal DVDRX160 - Manual (Page 34)

33
Record Quality
In the Recording Settings menu, use the
▲ or ▼ buttons to select the Default Quality of recordings and press the SELECT button
to drop down a menu.
Use the
▲ or ▼ buttons to select a desired value and press the SELECT button.
Press the RETURN button to return to the upper level menu and set up other options.
Note: For the diff erences of the six quality levels; HQ, SP, SP+, LP, EP, and SLP, see RECORDING MODES for reference.
1
APS (Auto Program Scan)
Your DVDRX160 has a built-in TV tuner. You can receive TV signals directly from the unit, but fi rst, you must conduct a channel scan
to tune in various channels automatically and determine their frequencies. Th
e tuned channels will be saved automatically. Even if the
power is off , the saved channel information will not be lost. Press the SETUP button to enter the System Setup mode.
Use
▲ or ▼ buttons, highlight APS, select it, and the following menu will be displayed.
Select the OK button, then the tuner will start searching through various channel frequencies and add available channels to the
system memory. Th is procedure may take several minutes.
When the scan is complete ‘TOTAL CHANNELS FOUND’ will appear on the screen with the number of channels that have been
stored to memory. Press the SETUP button on the remote control to exit.
Modify Channel
1.
2.
3.
■
■