Viking F20686 - Manual (Page 32)

63
P
ro
d
u
ct
C
a
re
62
P
ro
d
u
ct
C
a
re
Replacing Oven Lights
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main fuse or circuit
breaker before replacing bulb.
WARNING
DO NOT
touch bulb with bare hands. Clean off any signs of oil from
the bulb and handle with a soft cloth.
Halogen Lights
1. Unsnap glass light cover using a
screwdriver in the access groove.
2. Firmly grasp light bulb and
pull out.
3. Replace with halogen bulb
using volt and wattage
requirements listed on glass
cover.
4. Replace the light cover by
snapping glass cover onto
metal box.
5. Reconnect power at the main
fuse or circuit breaker.
Power Failure
DO NOT attempt to use during a
power failure. Unit will not function.
Troubleshooting
Problem Possible Cause and/or Remedy
Oven will not function. Oven is not connected to electrical power.
Have electrician check power circuit breaker,
wiring and fuses..
Oven does not operate in
self-clean cycle. Door is not shut tight enough for automatic
door latch to lock.
Door will not open. Oven is still in self-clean mode. If oven is
hot, door latch will release when a safe
temperature is reached
Oven light will not work. Light bulb is burned out.
Oven is not connected to power.