VIEWSONIC VS13647 - Manual (Page 34)

ViewSonic Pro8400 30
How to operate
1. Press MENU on the projector or Menu on the remote control to open the OSD menu.
2. When OSD is displayed, use / to select any feature in the main menu.
3. After selecting the desired main menu item, press to select feature setting.
4. Use / to select the desired item and adjust the settings with / .
5. Press MENU on the projector or Menu on the remote control, the screen will return to
the main menu.
6. To exit OSD, Press MENU on the projector or Menu on the remote control again. The
OSD menu will close and the projector will automatically save the new settings.
Picture
Color Mode
There are many factory presets optimized for various types of images.
„ Brightest : For the brightest environment.
„ Standard : For computer or notebook.
„ Theater : For home theater.
„ Dark Room : For dark environment.
„ User 1 : Memorize user 1 defined settings.
„ User 2 : Memorize user 2 defined settings.
Brightness
Brighten or darken the image.
Contrast
Set the difference between light and dark areas.
Video Setting
Allow you to enter the Video Setting menu.
„ Saturation ;!Adjust a video image from black and white to fully saturated color.
„ Sharpness ;!Sharpen or soften the image.
„ Tint ;!Shift colors toward red or green.
Color Setting
Adjust the color temperature. At higher temperature the screen looks colder; at lower
temperature, the screen looks warmer. If you select “User”, then you can change the
intensity of each of 3 color (Red, Green, Blue) to customize user color temperature.
User Color
User Color provides six sets (RGBCMY) of colors to be adjusted. When you select each
color, you can independently adjust its range and saturation according to your preference.
Gamma
Effect the represent of dark scenery. With greater gamma value, dark scenery will look
brighter.
Video/Audio