VIEWSONIC VS11986 - Manual (Page 24)

Gamma
Effect the represent of dark scenery. With greater gamma value, dark scenery will look brighter.
Computer Image (Computer Mode)
Frequency
Adjust the timing of the projector relative to the computer.
Tracking
Adjust the phase of the projector relative to the computer.
H Position (Horizontal Position)
Adjust the image left or right within the projection area.
V Position (Vertical Position)
Adjust the image up or down within the projection area.
Video Image (Video Mode)
Color
Adjust the intensity of colors.
Sharpness
Sharpen or soften the image.
Tint
Shift colors toward red or green.
Sound (Computer / Video Mode)
Volume
Adjust the volume level.
Mute
Cut off the sound temporarily.
Setting (Computer / Video Mode)
Menu Position
Choose the menu location on the display screen.
Projection
Adjust the picture to match the orientation of the projector: upright or upside-down, in
front of or behind the screen. Invert or reverse the image accordingly.
Signal Type
Specify the source to the Computer In terminal that you wish to project.
„ Auto : Automatically choose the most suitable chroma subsampling scheme.
Recommended!!
„ YPbPr : For component 480p,576p,720p,1080i signals.
„ RGB : For RGB video format. No subsampling. All information is accurately
transmitted.
„ YCbCr : For component 480i,576i signals.
ViewSonic
17
PJD6220/PJD6220-3D
PJD6230/PJD6240