Viking F20532A - Manual (Page 9)

17
P
ro
d
u
ct
C
o
n
tr
o
ls
16
Oven Functions and Settings
BAKE (Two-Element Bake)
Use this setting for baking, roasting, and casseroles.
CONV BAKE (Convection Bake)
Use this setting to bake and roast foods at the same time with minimal
taste transfer.
TRU CONV (TruConvec™)
Use this bake setting for multi-rack baking for breads, cakes, cookies
(up to 6 racks of cookies at once).
CONV ROAST (Convection Roast)
Use this setting for roasting whole turkeys, whole chickens, hams, etc.
CONV BROIL (Convection Broil)
Use this setting to broil thick cuts of meat.
HI BROIL
Use this setting for broiling dark meats at 1” thickness or less where
rare or medium doneness is desired.
MED BROIL
Use this setting for broiling white meats such as chicken or meats
greater than 1” thick that would be over-browned in high broil.
LOW BROIL
Use this setting for delicate broiling such as meringue.
SELF CLEAN
Use this function to clean oven.
Convection Dehydration (TRU CONV)
Use this function to dehydrate fruits and vegetables.
Convection Defrost (TRU CONV)
Use this function to defrost foods.
Proof (Left oven on 48”W. models)
Use this setting to allow yeast dough to rise.
Note: For more information on oven functions see “Operation”
section.
Lighting Burners
All burners are ignited by electric ignition. There
are no open-flame, “standing” pilots.
Surface Burners-Automatic Reignition
To light the surface burners, push and turn the
appropriate control knob counter clockwise to any position. This control is
both a gas valve and an electric switch. Burners will ignite at any “ON”
position with the automatic re-ignition system. If the flame goes out for
any reason, the burners will automatically reignite if the gas is still flowing.
When gas is permitted to flow to the burners, the electric igniters start
sparking. On all surface igniters you should hear a “clicking” sound. If you
do not, turn off the control and check that the unit is plugged in and that
the fuse or circuit breaker is not blown or tripped.
Within a few moments, enough gas will have traveled to the burner to
light. When the burner lights, turn the burner control to any position to
adjust the flame size. Setting the proper flame height for the desired
cooking process and selecting the correct cooking vessel will result in
superior cooking performance, while also saving time and energy.
Vari-Simmer™
Simmering is a cooking technique in which foods are cooked in hot
liquids kept at or just barely below the boiling point of water. Simmering
ensures gentler treatment than boiling to prevent food from toughening
and/or breaking up. The size of the pan and the volume of food can have
a significant effect on how high or low a flame is needed for simmering.
For this reason, Viking range and rangetop burners are engineered with a
Vari-Simmer setting. The Vari-Simmer setting is not just one simmer
setting, but provides a variable range of simmer settings. This variable
range of simmer settings allows you to adjust the flame height to achieve
the best simmer depending on the type and quantity of food being
simmered. It is this ability that makes the Vari-Simmer setting the most
accurate and trustworthy simmer on the market.
TruPower Plus™ Burner (where applicable)
Certain model ranges are equipped with a TruPower Plus 18,500 BTU
burner in the front right burner position. This burner is designed to
provide extra high heat output, especially when using large pans, and
should be used for boiling large quantities or if you need to bring
something to a boild quickly. While the TruPower Plus burner has the
extra power needed to bring large quantities of liquid to a boil rapidly, it
is also able to be turned down low enough to provide a very low and
delicate simmer making this burner the most versatile burner on the
market.
Surface Operation
O
p
e
ra
tio
n