Velocity Micro SEAL-IT 100 - Manual (Page 34)

Chapter 2: SEAL-IT 100
SEAL-IT 100 Device Driver User Guide
30
7. Click OK to save the profile and exit ABgene SEAL-IT 100 Diagnostics.
Related topics
Roll count Number of times the rolling operation
is performed. Always set to 1.
Roll speed Speed at which the roller that presses
the seal onto the plate moves.
Reduce the speed to get a firmer seal.
Roll Type:
❑
Full roll
❑
Half roll
With Full roll selected, the roller starts
in the middle of the plate, rolls one
half, then returns to roll the other half,
and then performs a complete roll
across the plate.
With Half roll selected, the complete
roll is omitted.
Setting Comments
For information about... See...
Opening diagnostics “Opening diagnostics” on page 12
Adding the SEAL-IT 100 to the
device manager “Adding devices” on page 10
The next step “Setting the properties for a device” on
page 16
The workflow this procedure
belongs to “Workflow for configuring the SEAL-IT
100” on page 28
Managing SEAL-IT 100 profiles “Managing SEAL-IT 100 profiles” on
page 32
Using SEAL-IT 100 Diagnostics “Operating the SEAL-IT 100 with
diagnostics” on page 33
Using SEAL-IT 100 tasks “Setting SEAL-IT 100 task parameters”
on page 31
Profiles “About profiles” on page 15