VIEWSONIC CD4230 VS12541 - Manual (Page 31)

ViewSonic CD4230
29
• Schedule: Using the Schedule function allows you to set up to seven different scheduled time
intervals when the LCD Monitor will be activated. You can select the time the monitor turns on
and turns off, the day of week the monitor is activated, and which input source the monitor will
use for each scheduled activation period.
Note: Set up current time first before setting up the Schedule.
• Press ENTER to display the sub-menu:
• To set up a schedule item:
1. Press or
button to select a schedule item (item 1 through item 7), and then press
button.
2. With the On item highlighted, press ENTER and then press or button to set the hour
when the LCD monitor will be turned on, then press button to move to the minute slot to set
the minute. If you create a schedule but do not want to use a power on time, select “--” for the
hour slot, and “00“ for the minute slot.
3. Press EXIT, and then pressbutton to highlight the Off item. Press ENTER, and then press
or button to set the hour when the LCD monitor will be turned off, then press button to
move to the minute slot to set the minute. If you create a schedule but do not want to use a
power off time, select “--” for the hour slot, and “00“ for the minute slot.
4. Press EXIT, and then pressbutton to highlight the Input item, and then press or button
to select an input source. If no input source is selected, the input from the previous schedule
item will be used.
5. Pressbutton to select what days in a week this schedule item will be take effect, and then
press ENTER button.
6. If you want to set up more schedule items, press EXIT and then repeat the steps above.
• A check mark in the box next to the number of the schedule item indicates that the selected
schedule is in effect.
Notes:
• The selection of Every Day within a schedule item takes priority over other schedules that are
set up to operate weekly.
• When schedule items overlap, scheduled power on time has priority over scheduled power off
time.
• If there are two schedule items programmed for the same time, then the highest numbered
schedule has priority.
Schedule
Today
1
7
2
3
4
5
6
On
2009. 10. 2 Fri 4:55:57
-- : 00
Off Input
-- : 00 CVBS1
Every Day
Mon
Tue Wed Thu
Fri Sat Sun
Every Week
:Move :Exit Exit :Select :Enter Enter