VIEWSONIC CD4230 VS12541 - Manual (Page 28)

ViewSonic CD4230
26
Option
Aspect ratio
• With this function, you can choose to let the LCD monitor display the input image in its original aspect
ratio (when Original is selected), or force the LCD monitor to fill the input image on the entire display
area (when Full is selected).
• Press ENTER, and then or button to change selection.
PIP (Picture in Picture)
Note: This item is not available for the CVBS1, CVBS2 and S-Video inputs.
• Press
ENTER to display the sub-menu:
• ON/OFF: Turns on or off the PIP function of this LCD monitor. Press ENTER, and then or
button to turn this function on or off.
• Main Input: Selects the input source for the main picture. Press ENTER, and then or
button to change selection.
• Sub Input: Selects the input source for the sub picture. Press ENTER, and then or button
to change selection.
• The availability of the PIP function is determined by the signal source combination. Please refer
to the table below. ( : PIP function available, : PIP function unavailable)
Notes:
• In PIP mode, only the audio from the Main Input picture will be available.
• The size and position of the Sub Input picture can not be changed.
Main picture signal source
CVBS1 CVBS2 S-Video VGA YPbPr DVI HDMI
Sub
picture
signal
source
CVBS1
CVBS2
S-Video
VGA
YPbPr
DVI
HDMI
Aspect Ratio Full
PIP
Video Source
YPbPr
Auto Adjustment
Clock Frequency
16
Phase 22
H.Position
V.Position
3D Comb
Blue Screen ON
Option
:Move :Enter :Exit Enter Exit
ON/OFF ON
Main Input YPbPr
Sub Input HDMI
Option
:Move :Enter :Exit Enter Exit