VIEWSONIC CD4230 VS12541 - Manual (Page 10)

ViewSonic CD4230
8
Terminal Panel
23
22
1 2 3 5 6 7 8 9 10 11 12 13 14 15 16 17
18 19
4
20
AC-IN (100-240VAC, 4.0A)
Connects to the supplied power cord.
AC-OUT (100-240VAC, 1.51A)
Outputs AC power to another CD4230 monitor.
LINE-IN
To input audio signals from external equipment such
as a computer.
SPEAKER-OUT (8 Ω, 6W x 2)
To output audio signals for external speakers from
the LINE-IN, AUDIO-IN or HDMI jacks.
AUDIO-IN R/L (CH1/CH2)
To input audio signals from external equipment such
as a VCR or DVD player.
HDMI
To input digital RGB signals from a computer.
* This connector does not support analog input.
Audio is supported via HDMI.
DVI-OUT
To output digital RGB signals from DVI-IN to another
monitor.
DVI-IN
To input digital RGB signals from a computer.
*This connector does not support audio input. The
audio signal should be connected to the LINE-IN
jack.
VGA-OUT (mini D-Sub 15 pin)
To output signals from VGA-IN.
VGA-IN (mini D-Sub 15 pin)
To input analog RGB signals from a computer or
other RGB equipment.
External control (mini D-Sub 9 pin)
Connects to the RS-232 output connector of a
computer, or the RS232-OUT connector of a multi-
connected CD4230 monitor. Connect the RS232-OUT
connector to the RS232-IN connector of another
CD4230 monitor.
Y Pb Pr OUT
To output signals from Y Pb Pr IN.
Y Pb Pr IN
Connects to equipment such as a DVD player, HDTV
device or Laser disc player.
S-VIDEO-IN
Connects to equipment such as a VCR or DVD
player.
S-VIDEO-OUT
To output signals from S-VIDEO-IN.
AV1 IN (BNC type connector)
Connects to equipment such as a VCR or DVD
player.
AV2 IN (BNC type connector)
Connects to equipment such as a VCR or DVD
player.
AV1 OUT (BNC type connector)
To output signals from AV1 IN.
AV2 OUT (BNC type connector)
To output signals from AV2 IN.
Remote control sensor
Receives the signal from the wireless remote control.
Kensington lock hole
For installing a Kensington-type security lock.
IR OUT
When connected to another device with IR input, it
relays the remote control commands from the LCD
monitor to the device.
Ambient light sensor
Automatically detects ambient lighting condition and
adjusts screen brightness.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
21