Vizio E3D420VX - Manual (Page 36)

5
27
E3D320VX / E3D420VX / E3D470VX
Setting the Time Zone
To ensure the correct time is displayed when you press the INFO button, set the
TV’s time zone:
To have the TV display the correct time, you must be connected to
the internet via an Ethernet cable or a wireless network.
1. Press the MENU button on the remote.
The on-screen menu is displayed.
2. Use the Arrow buttons on the remote
to highlight the Settings icon and
press OK. The Settings menu is
displayed.
3. Use the Arrow buttons on the remote
to highlight Time & Local Settings
and press OK. The Time & Local
Settings menu is displayed.
4. Highlight Time Zone and press OK.
The Time Zone menu is displayed.
5. Highlight your time zone and press OK.
6. Highlight Daylight Savings and press
OK. The Daylight Savings menu is
displayed. Choose
On if daylight
savings is in effect, or Off if it is not.
7. Highlight Postal Code. Enter your
ZIP code using the keypad on the
remote, then press
OK. The ZIP code
information is often used by VIA
Apps to give you the most accurate
location-based information, such as
weather or news.
8. Press the EXIT button on the remote.
Adjusting the CEC Settings
The CEC function on your TV enables you to control HDMI-connected devices
with the included remote without any additional programming.
Not all HDMI devices support CEC. See your device’s user manual
for details.
To enable, disable, or adjust CEC settings:
9. Press the MENU button on the remote.
The on-screen menu is displayed.
10. Use the Arrow buttons on the remote
to highlight the Settings icon and
press OK. The Settings menu is
displayed.
11. Use the Arrow buttons on the remote
to highlight CEC Settings and press
OK. The CEC Settings menu is
displayed.
12. Use the Arrow and OK buttons to
adjust each setting:
• CEC Function - To use CEC, you
must select Enable.
• System Audio Control - When
system audio control is on, you
can control your device’s audio
using the TV’s remote control.
• Device Discovery - Use this
function to determine if your device
is connected and supports CEC.
13. Press the EXIT button on the remote.