Scanning for channels, Adding new channels, Scanning for channels adding new channels – Vizio E3D420VX User Manual
Page 31
22
5
E3D320VX / E3D420VX / E3D470VX
Scanning for Channels
Before the TV can detect and display channels and their associated information,
you must scan for channels. A channel scan may also be necessary when the
TV has been moved to an area where different free-to-air broadcast television
channels are available.
1. Press the
MENU button on the remote.
The on-screen menu is displayed.
2. Use the
Arrow buttons on the remote
to highlight the
Settings icon and
press
OK. The TV Settings menu is
displayed.
3. Highlight
Auto Channel Scan and
press
OK. The auto channel scan
begins.
4. Wait until the channel scan is 100%
complete. Highlight
Done and press
OK.
5. Press the
EXIT button on the remote.
Adding New Channels
Occasionally, you may need to add a new analog channel or add a new range of
channels. You can do this by using the Partial Channel Search and Add Analog
Channel options.
To add a range of new channels:
1. From the Settings menu, highlight
Partial Channel Search. The Partial
Channel Search menu is displayed.
2. Highlight
Scan Mode and select the type of channel you are adding:
Analog/Digital, Analog, or Digital.
3. Highlight
From Channel and enter the channel from which you want to
begin the scan. (Use the
Number Pad on the remote to enter the channel.)
4. Highlight
To Channel and enter the channel to which you want to end the
scan. (Use the
Number Pad on the remote to enter the channel.)
5. Highlight
Start and press OK. The partial channel search begins.
6. Wait until the partial channel search is 100% complete. Highlight
Done and
press
OK.
7. Press the
EXIT button on the remote.
To add a single new analog channel:
1. From the Settings menu, highlight
Add
Analog Channel. The Add Analog
Channel menu is displayed.
2. Highlight
Enter Channel # and use the
Number Pad on the remote to enter
the number of the channel you are
adding.
3. Highlight
Add Channel and press OK.
The TV scans for the channel.
4. When the TV is done scanning for the
channel, press the
EXIT button on the
remote.