Remote control, En-11 – VIEWSONIC VS12476 User Manual
Page 14
EN-11
Remote Control
POWER
Turn the projector on or off.
VGA1
Select analog RGB signal from
COMPUTER IN 1 terminal.
Source
Manually select an input source by
sequence.
Enter
Confirmed selections.
Keystone+ / -
Adjust image distortion caused by
tilting the projector.
ViewM
Switch in between high brightness
performance or Accuracy color
performance.
Freeze
Press “Freeze” to pause the screen
image. Press again to cancel the
freeze function.
Four directional buttons
Use four directional buttons to select items
or make adjustment to your selection.
Mouse
Switch between OSD control and
Mouse control (Apply to Navigation
buttons, Enter/Mouse Left Click, and
Exit/Mouse Right Click buttons).
Exit
Exit OSD Menu.
Laser
Aim the remote at the viewing
screen, press and hold this button to
activate the laser pointer.
Magnify
Zoom in and out the images.
VGA2
Select analog RGB signal from
COMPUTER IN 2 terminal.
Volume + / -
Adjust the volume level.
Video
Select video signal from video
equipment.
Mute
Cut off the sound temporarily. Press again
to cancel the Mute function.
Auto
Resynchronize the projector to the
input signal from a computer. This
function is available for computer
mode only.
Light
Enable backlight functions of the remote
control’s buttons.
MENU
Display on-screen display menus.
Blank
Cut off the screen temporarily. Press again
to cancel the Blank Screen function.
1
2
3
4
5
6
7
14
8
15
9
16
10
17
11
18
12
19
13
20