VIEWSONIC DLP PROJECTOR PJD7400 - Manual (Page 20)

Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
• In the connections shown below, some cables may not be included with the projector (see
"Shipping contents" on page 6 ). They are commercially available from electronics stores.
• The connection illustrations below are for reference only. The rear connecting jacks
available on the projector vary with each projector model.
• For detailed connection methods, see pages 17-19.
1. VGA cable
2. VGA to DVI-A cable
3. USB cable
4. Component Video to VGA (D-Sub)
adapter cable
5. S-Video cable
6. Video cable
7. Audio L/R cable
8. Audio cable
9. Microphone 3.5 mini jack cable
TYPE B
USB LAN
RS 232 MONITOR OUT
COMPUTER IN1
COMPUTER IN2
S-VIDEO
VIDEO
AUDIO IN2 (R)
AUDIO IN2 (L)
AUDIO IN1
AUDIO
OUT
MIC
5 7
8
8
8 9
4
1 2
1
6
3
Notebook or
desktop computer
Speakers
or
A/V device Monitor
(DVI) (VGA)
Microphone
15