Vivotek ST3402 - Manual (Page 66)

4-65
4.3.3
52B
Schedule in event mode
You can select to record in Event mode or Continuous mode by the Schedule mode
selector as shown in
X
Figure 4-10
X
. There are two types of event recording, please refer
to Section
X
4.3.3.1
X
and Section
X
4.3.3.2
X
for more information.
Figure 4-10 Schedule Mode Selector
4.3.3.1
79B
Motion detection
Figure 4-11 Motion Detection Selector
X
Figure 4-11
X
shows the window selection you want to record when motion detection is
triggered.
4.3.3.2
80B
Digital input
Figure 4-12 Digital Input Selector
X
Figure 4-12
X
shows the four digital input conditions. Select the triggering condition that
you would like to start recording.
high : Event will be triggered when the digital input is high.
low : Event will be triggered when the digital input is low.
rising : Event will be triggered if the digital input changes from low to high.
falling : Event will be triggered if the digital input changes from high to low.
4.3.4
53B
Schedule in Continuous mode
X
Figure 4-13
X
shows that if you have selected the Continuous mode then it will record