Vivotek ST3402 - Manual (Page 38)

3-37
Figure 3-17 Cursor change to click on image mode
9 Enable PTZ hot key －
When the option is enabled, user can control PTZ camera by using keyboard.
The following table represents functionality of each hot key:
9 Hot Key 9 Functionality
9 NUMPAD_0 9 AutoFocus
9 NUMPAD_1 9 Focus -
9 NUMPAD_2 9 Down
9 NUMPAD_3 9 Focus
+
9 NUMPAD_4 9 Left
9 NUMPAD_5 9 Home
9 NUMPAD_6 9 Right
9 NUMPAD_7 9 Zoom -
9 NUMPAD_8 9 Up
9 NUMPAD_9 9 Zoom
+
9 NUMPAD_DIVIDE 9 Pan
9 NUMPAD_MULTIPLY 9 Stop
9 NUMPAD_SUBTRACT
9 Patrol
Table 3-2 PTZ Hot Key
9 Apply to new device －
After reconnected to Network Camera or video server, if Monitor found that the
server type changes, for example, the original camera is with a built-in PT len, but
the connected device is a video server. This setting tells the Monitor to accept the
new device and use the previous setting values (such as schedule and recording
media type, …ect) For more detail, please refer to section 3.7.1.