VIEWSONIC PJ406D - Manual (Page 17)

13 ViewSonic PJ406D
Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with an elevator foot for adjusting the
image height.
To raise the image:
1. Press the elevator button
 .
2. Raise the image to the desired height angle  , then release
the button to lock the elevator foot into position.
3. Use
 to fi ne-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the eleva-
tor foot into position.
3. Use
 to fi ne-tune the display angle.
Elevator Foot
Elevator Button
1
2
3 3