Fan mode, Orientation, Factory default – Vidikron Vision Model 85 User Manual
Page 83: Pre l iminar y
Vidikron Vision 85 Owner’s Operating Manual
71
PRE
L
IMINAR
Y
Fan Mode: If the projector is being used in a high-altitude environment, use the Fan Mode
control to prevent it from overheating. Set it to High Altitude (2) to run the fan at high speed;
set it to Normal (1) to run the fan at normal speed.
Orientation: Refer to Adjusting the Picture Orientation on page 32.
Factory Default: To reset all projector settings (including image settings) back to their
factory defaults, choose Factory Default from the Options menu. When the confirmation
message appears, select All Reset to perform the reset or Return to cancel. This action is
not undoable. Proceed with caution!
The Factory Default command does not reset the Lamp Timer or OSD
Language setting.
Note