Contrast, Brightness, Color – Vidikron Vision Model 85 User Manual
Page 78: Tint, Sharpness, Color temp, White balance, Vac: iris, Lamp power, Pre l iminar y
66
Vidikron Vision 85 Owner’s Operating Manual
PRE
L
IMINAR
Y
Contrast: Refer to Contrast on page 53.
Brightness: Refer to Brightness on page 52.
Color: Refer to Color Saturation on page 53.
Tint: Refer to Tint on page 54.
Sharpness: Refer to Sharpness on page 55.
Color Temp.: To adjust the color temperature, select Color Temp. from the Picture Adjust
menu. (Color temperature defines the “color of gray.”) Press
or
to select 5500, 6500,
7500, 8500, 9300 or 10500. In most cases, 6500 or 7500 will produce the most realistic colors.
Higher settings produce a “bluer” picture; lower ones cause the image to appear more red.
White Balance: Select White Balance from the Picture Adjust menu to choose a white
balance preset (or “gamma curve”) to store in the currently-selected picture memory. For
more information on white balance presets, refer to White Balance on page 68.
VAC: Iris: Select VAC: Iris from the Picture Adjust menu to increase or decrease the aperture
or iris size (the physical opening through the lens; similar to an “f-stop” on a camera). Doing
so allows you to optimize brightness and contrast according to the amount of ambient light
in the viewing area.
Select High Brightness or Theater for rooms with lots of ambient light. Select CRT Emulation
for more “theater-like” viewing conditions (little or no ambient light).
Lamp Power: Select Lamp Power from the Picture Adjust menu to adjust the lamp output
level. You can choose to run the lamp as bright as possible (220W; this is the default setting)
or you can choose the lower setting (180W). Generally, lower lamp output can prolong the
life of the lamp, but decreases brightness.
ISF Night
For viewing images with the
brightness slightly
increased in a darkened
room.
6500
CRT
Emulation
Low
(180W)
Off
Off
ISF
NT
Table 4-2. Default Picture Memory Settings for Digital 1080i and 1080p Sources
(continued)
Picture
Memory
Setting
Description
Default Settings for Selected Picture Memory
Remote Con
trol Key
Color Te
mp.
VAC (Iris)
Lamp Pow
e
r
Sharpness
En
hancemen
t
Auto
Co
ntrast