Pre l iminar y – Vidikron Vision Model 85 User Manual
Page 24
12
Vidikron Vision 85 Owner’s Operating Manual
PRE
L
IMINAR
Y
1.
IR OUTPUT INDICATOR
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2.
LIGHT
Press to illuminate the buttons.
3.
ON / OFF
Press to turn the projector on or off.
4.
ENT (Enter)
Press to select a highlighted menu item or confirm a changed setting.
5.
Cursor Buttons (
,
,
,
)
Use these buttons to select items or settings, adjust settings or switch display patterns.
When no menu is present on-screen, the UP and DOWN buttons toggle through the
available aspect ratios, in this order:
UP Button = 16:9 - Standard (4:3) - Letterbox - IntelliWide - Cinema - IntelliWide 2.35
DOWN Button = IntelliWide 2.35 - Cinema - IntelliWide - Letterbox - Standard (4:3) - 16:9
Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this
order:
LEFT Button = HDMI 2 - HDMI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video 2 -
S-Video 1 - Composite
RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB
2 - HDMI 1 - HDMI 2
6.
RETURN/EXIT
Press this button to exit the current menu and return to the previous one, or to cancel an
operation.
7.
MENU
Press this button to access the OSD controls.
On some remote control units, this button is where the RETURN/EXIT
button (item #6) appears here.
IntelliWide 2.35 is available only on the Vision 85/CineWide and Vision
85/CineWide with AutoScope. For more information about aspect ratios,
refer to Table 4-1.
The “direct select” function of the UP, DOWN, LEFT and RIGHT buttons is
available only on the analog inputs (HD/RGB, SD Component, Composite
and S-Video).
On some remote control units, the ENT (Enter) button (item #4) is in this
location.
Note
Note
Note
Note