Main menu, Pre l iminar y – Vidikron Vision Model 85 User Manual
Page 76
64
Vidikron Vision 85 Owner’s Operating Manual
PRE
L
Y
Main Menu
Press MENU on either the remote control or built-in keypad (on the projector rear panel) to
display the Main Menu, shown in Figure 4-7. The Main Menu is the starting point for
calibrating the Vision 85 to optimize the display of digital 1080i and 1080p sources.
Figure 4-7. Vision 85 Main Menu (1080i Digital or 1080p Sources Only)
To use the on-screen menus:
1.
Press
or
to select a sub-menu.
2.
Press
or
to select a sub-menu item.
3.
For items that present a list of choices, such as Picture Memory:
a Press
ENTER
or
.
b Press
or
to select a value from the list.
c Press
ENTER
again to confirm your selection.
d Press
to return to the menu.
– OR –
For items that are represented by numeric values, such as Contrast:
a Press
or
to adjust the value.
b Press
or
to select another menu item.
– OR –
a Press
ENTER
to hide the “parent” menu and display only the slidebar for that item.
b Press
or
to adjust the value.
c Press
or
to select another item to adjust or
ENTER
to return to the menu.
4.
To switch from one sub-menu to another (for example, Picture Adjust to White Balance),
press
repeatedly until no menu item is highlighted. Then, press
or
.
5.
Press MENU to hide the OSD menus.
➤
Contrast
0
Brightness
0
Color
0
Picture Memory 1
Tint
0
Sharpness
0
CLR Temp.
7500
White Balance 1
RVR :Iris 1
Lamp Power Hi
Advanced
Default
White Balance
HD/RGB Adj.
Options
Language
Picture Adj.
Contrast +
- 5