VBrick Systems VBRICK APPLIANCE VB6000 - Manual (Page 104)

94 © 2008 VBrick Systems, Inc.
Status: Network Status
Status: Network Status > Codec
This page lets you view various network-level parameters.
General
Interface
This section reports the existence of any undesired (and unrequested) video streams being
received by the VBrick. Unrequested streams greater than 1.5 Mbps are automatically flagged
and dropped. The reporting is made for each IP interface individually. On Ethernet models,
only one interface exists.
Power Supply
Voltage Displays the measured voltages present and provided to the VBrick
(24V, 12V, 5V, 3.3V 2.5V). The tolerance range for 24V is minimum
18V to maximum 25V. The range for all other voltages is plus or minus
5%.
COM1/COM2
Passthrough
Operational State The current operational state of COM1/COM2 serial passthrough
port. The possible values are:
• Disabled.
• Enabled Active.
• Enabled Internal Error.
• Enabled Rejected.
• No Dedicated IP Addr.
Active RFC-SAP Count Number of SAP sessions the appliance is currently listening to for
the purpose of RFC 2974-compliant SAP timing.
Network Port Status Status of the Ethernet network interface.
Network Port Speed Speed of transmission for the Ethernet network interface.
Network Port Mode The mode of transmission for the Ethernet network interface.