Vantec LX ULTRA - Manual (Page 30)

( Figure 13.2-A )
( Figure 13.3-A )
28
Maintenance Page
A reboot of the NAS is possible without
the need of powering off. If you feel the
network or NAS is not smooth or a bit
sluggish, try a reboot of the NAS.
( Figure 13.2-A )
13.2 System reboot
A reset will reset the NAS to Factory
Default Settings. It will reset User Names,
Passwords, IP Addresses to DHCP
servers, Workgroups and Time. However
it will not reset the FTP, SMB and Folder
Sharing portions of the NAS.
( Figure 13.3-A )
13.3 Restoring Factory Defaults