Vantec LX ULTRA - Manual (Page 17)

(2) You may change the user's password and
access authority. When finished, click
"Modify".
( Figure 8.2-B )
(1) Select the user account you wish to
modify. Once selected, click "Modify".
( Figure 8.2-A )
8.2 Modifying a user's account
( Figure 8.2-A )
( Figure 8.2-B )
8.1 Creating a user account
15
SMB Server
(1) Click on "New" to setup a new account.
( Figure 8.1-A )
(2) Enter the desired "Name" and "Password"
for the account and click "Add".
( Figure 8.1-B )
( Figure 8.1-A )
( Figure 8.1-B )
If someone wants to share the NAS disk from
the network, they must apply for a user account
first. Creating, deleting, modifying and enabling/
disabling accounts can all be done on SMB
Server page. Once the user account has been
setup, they may access the NAS disk by using
their set user name and password.
8. SMB Server
1. The Access authority of "Read Only" means
that the user can only read files from the NAS
only. "Read/Write" means that the user is able
to read and write to the NAS freely.
2. Spaces is not an acceptable character.
NOTE :