Vantec LX ULTRA - Manual (Page 29)

On the maintenance page, you are able to
do Firmware Upgrades, preform a System
Reboot and restore Factory Defaults.
( Figure 13.1-A )
(2) Check to make sure the file and pathway
of the firmware file is correct. If everything
is correct, click "Upload".
( Figure 13.1-C )
(3) When the upgrade of the firmware is
complete, click on "OK". Preform a power
cycle of the NAS by powering off and on
the NAS.
( Figure 13.1-D )
13. Maintenance Page
( Figure 13.1-B )
( Figure 13.1-C )
( Figure 13.1-D )
27
Maintenance Page
( Figure 13.1-A )
(1) Click "Browse" and locate the firmware
file. When the firmware file is selected
click "Open".
(Figure 13.1-B)
13.1 Upgrading firmware