Vox Valvetronix ToneLab SE - Manual (Page 26)

16
Playing ToneLabSE
P
ROGRAM
S
ELECT MODE
ToneLabSE has 96 programs (24 banks x 4 programs), and every one of these
programs can be totally rewritten or “custom tweaked” to your heart’s content. With
the factory settings, banks 1–8 contain a total of 32 preset programs. (Banks 9–16
and 17–24 contain the same preset programs as banks 1–8.)
In order to select programs, you need to be in Program Select mode.
S
ELECTING A PROGRAM
As an example, here’s how to select program 2-3 (bank 2, program 3).
1. Make sure that ToneLabSE is in Program Select mode.
If the Effect On/Off pedal LED is lit, you’re in Effect On/Off mode. Press the FX
ON/OFF pedal to change to Program Select mode.
2. Use the BANK UP/DOWN pedals (6.1) to select bank 2.
The bank number blinks in the bank display.
3. Press the program select 3 pedal (6.2).
Program 2-3 will be recalled instantly. The program select 3 pedal LED will
light, and the bank number will also change to be steadily lit.
HINT: When you’ve selected the Bank but not the Program, the previously-selected
program is still active. So if you’re playing live and your next program change
requires you to switch to a different bank, you can select that bank ahead of time,
ensuring a timely, seamless change.
E
FFECT
O
N
/O
FF MODE
You can use program select pedals 1–4 to switch the pedal effect, modulation
effect, delay effect, and reverb effect of the current program on/off individually.
Also, you can use the BANK DOWN pedal to switch the signal that is being sent
through the external effect processor connected to the INSERT jacks.
When you want to switch programs, press the effect ON/OFF pedal once again to
return to Program Select mode.
NOTE: In Effect On/Off mode, the BANK UP pedal does nothing.