Vidikron Vision 20 - Manual (Page 39)

Vidikron Owner’s Manual
38
English
Image Option 2
HD/RGB Adjust.: The following settings are only available with a PC or DTV RGB signal. There is no position adjustment when using
DVI-D signal.
■
AUTO: Adjusts the phase, frequency and position automatically.
■ Freq.: Adjusts the frequency of the signal.
■ Phase: Adjusts the phase of the input signal.
■ H. Pos.: Adjusts the horizontal position of the image.
■ V. Pos.: Adjusts the vertical position of the image.
To enter into the memory selection menus, use Memory Store and Memory Recall menus to save and load up to three different memories.
There are three memories: Memory 1, Memory 2 and Memory 3.
Auto.
Freq.
Phase
H. Pos.
V. Pos.
HD/RGB Adjust
0
0
0
0
YES ?
Memory 2
Memory 1
Memory Store
Memory 3 Memory 2
Memory 1
Memory Recall
Memory 3
Aspect Ratio
Input Select
Memory Store
HD/RGB Adjust
Memory Recall
Image Options