Vidikron Vision 20 - Manual (Page 14)

English
Overview
13
1. STANDBY/ON
Press this key for ONE second to turn on the unit when it is in the
standby mode. Or press this key to turn off this unit when it is on.
2. INPUT
Switches input sources sequentially.
3. MEMORY
Sequentially recalls settings 1 ~ 3 saved to memory. (Please see
"Selecting Video Memory" on page 30.)
4. MENU
Turns the on-screen display control menu on or off.
5. ENTER
Enters settings for items shown in the menu.
6. EXIT
Exits and saves the setting(s) of items in the menu.
7. ARROW (c/e/d/f)
Use to select the menu or to make various adjustments.
8. POWER LED
Indicates power status
■ Lit orange when the AC power cord is plugged into the wall outlet
(standby mode). Once in the standby mode, you can press the
STANDBY/ON key on the projector or the ON key on the remote
control for ONE second to turn on the projector.
■ Lit green when the power is turned on (operational mode).
■ Flashes orange for the first 30 seconds after powering up, indicating
that the lamp is warming up.
■ Flashes green for one minute after the projector is turned off to
indicate that the lamp is cooling down.
9. LAMP LED
Indicates the status of lamp.
■ Lit red when the lamp has developed a problem. Please contact your
Vidikron dealer for assistance.
10. Zoom Ring
Adjusts the size of image
■ Rotate clockwise to enlarge the image or rotate counterwise to make
the image smaller.
11. Focus Ring
Adjust the focus of the projected images.