VIEWSONIC PJ458D - Manual (Page 33)

32 ViewSonic PJ458D
Auto Shutdown Uses this function to automatically turn off the lamp if the
projector does not detect an input signal for specified
time period (30 minutes).
Select the desired setting with the  /  buttons:
ON
OFF
OSD Timeout Duration OSD (On-Screen Display) menu stays active (at
idle state by second).
Select the desired setting with the  /  buttons.
Menu Position Selects the position of the OSD (On-Screen Display) menu
on the screen.
Select the desired setting with the  /  buttons.
Factory Reset Resets the projector to its factory default settings.
Press the MENU\ENTER button on the Projector Control Panel
or the Enter button on the Remote Control to enter its sub-
menu, select the desired setting with the  /  buttons, and
confirm the selection with the MENU\ENTER button on the
Projector Control Panel or the Enter button on the Remote
Control again.
Audio
Option Actions/Descriptions
Volume Adjusts the volume.
Select the desired setting with the  /  buttons:
Press the  button to decrease the volume.
Press the  button to increase the volume.
Mute Cuts off the sound temporarily.
Select the desired setting with the  /  buttons:
ON
OFF