Viking F20560 User Manual

Page 2

IMPORTANT

–

Please Read and Follow

Your safety and the safety of others is
very important.

We have provided many important safety
messages in this manual and on your
appliance.

ALWAYS read and obey all

safety messages.

This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.

All safety messages will be preceded by
the safety alert symbol and the word
“DANGER,” “WARNING” or “CAUTION.”
These words mean:

Hazards or unsafe practices

which WILL result in severe personal

injury or death

DANGER

Hazards or unsafe practices

which COULD result in severe personal

injury or death

Hazards or unsafe practices which

COULD result in minor personal injury

or property damage.

All safety messages will identify the

hazard, tell you how to reduce the chance

of injury, and tell you what can happen if

the instructions are not followed.

WARNING

CAUTION

Table of Contents

Mounting Bracket ________________________________________________________________9
Hood __________________________________________________________________________10
Non-ducted Recirculation Filter ___________________________________________________11

Operation _________________________________________________________________________12
Maintenance _______________________________________________________________________13

W A R N I N G

FIRE AND
ELECTRICAL
SHOCK HAZARD

To reduce the risk of fire, electric shock, or
injury to persons, observe the following:

• Use this unit only in the manner intended

by the manufacturer. If you have questions,
contact the manufacturer at the address or
telephone number listed in the warranty.

• Before servicing or cleaning unit, switch

power off at service panel and lock
service panel to prevent power from
being switched on accidentally. When
the service disconnecting means cannot
be locked, securely fasten a prominent
warning device, such as a tag, to the
service panel.

• Installation work and electrical wiring

must be done by a qualified person(s) in
accordance with all applicable codes and
standards, including fire-rated construction
codes and standards.

• Sufficient air is needed for proper

combustion and exhausting of gases
through the flue (chimney) of fuel burning
equipment to prevent backdrafting.
Follow the heating equipment
manufacturer’s guidelines and safety
standards such as those published by
the National Fire Protection Association
(NFPA), and the American Society for
Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE), and
the local code authorities.

• When cutting or drilling into wall or

ceiling,

DO NOT damage electrical wiring

and other hidden utilities.

• Ducted fans must

ALWAYS be vented to

the outdoors.

•

DO NOT use this unit with any separate
solid-state speed control device.

• To reduce the risk of fire, use only metal

ductwork.

• This unit must be grounded.