Uniden DECT2085-4WX - Manual (Page 8)

8
Installing the Phone
9
Installing the Belt Clip
Lne.up.the.holes.on.each.sde.of.the.handset..To.attach.the.belt.clp,.nsert.nto.the.holes.on.each.sde.of.the.
handset..Press.down.untl.t.clcks.
To remove the belt clip,.pull.ether.sde.of.the.belt.clp.to.release.the.tabs.from.the.holes.
Connecting the AC adapter
Base
To avoid risk of fire and shock, only use the Uniden PS-0009 AC adapter supplied with your
cordless.telephone.
Connect the large, yellow-
tipped AC adapter to the
base’s DC IN 9V jack.
Connect the AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
Route the cord inside the
molded wiring channel.
Connect the large, yellow-
tipped AC adapter to the
base’s DC IN 9V jack.
Connect the AC adapter to a
standard 120V AC wall outlet.
DO NOT use an AC outlet
controlled by a wall switch.
Route the cord inside the
molded wiring channel.