Uniden 248 - Manual (Page 46)

[ 44 ] A D D I T I O N A L I N F O R M A T I O N
C H A N G I N G T H E D I G I T A L S E C U R I T Y C O D E
The digital security code is an identification code used to connect the handset and the base unit.
Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set. (See page 4.)
In the rare situation that you suspect another cordless telephone is using the same security code,
you can change the code.
1 Remove the handset from the base unit. Press
.
2 While the handset is emitting the paging sound, press
and hold and replace the handset on the
base unit. The paging tone stops.
Leave the handset on the base for more than 3 seconds.
A random, new security code is set.
If the handset
battery pack is
completely
discharged or the
battery pack is
removed, the digital
security code will
be lost.
If this happens, a
new security code
is set automatically
next time the
battery pack is
charged.
TRU248_2.4GHz_OM 7/26/00 1:12 PM Page 44