Uniden DCT7585 - Manual (Page 52)

51
Setting a Security Code or Personal Identification Number (PIN)
To play your messages from a remote location, you will need to enter a two-digit security code or Personal
Identification Number (PIN). The default security code is 80.
From the base From the handset
1. Press [menu/cock] twice. The current security code appears
on the base and it is announced.
2. Press [ /select] or [ /select] until the desired number
appears. Press and hold [ /select] or [ /select] to
quickly scroll through the numbers on the display.
3. Press [set] to select the security code. A confirmation tone
sounds; the system announces the new security code.
1. Press [menu/clear]. Select the
ANSW. SETUP menu, and then the
SECURITY CODE submenu.
2. Use the number keypad ([0]
through [9]) to enter a two-digit
security code (01-99) .
3. Press [select/ ] . You will hear a
confirmation tone.