Uniden DCT7585 - Manual (Page 23)

22
Note: The handset first clears it registration information from the base and then deletes
the link to the base from its own memory. The handset will now display MODELS VARY!
CHARGE HANDSET ON THE BASE FOR REGISTRATION OR REFER TO OWNER’S
MANUAL. If the handset cannot contact the base, it will display UNAVAILABLE. If this
happens, see Resetting the Handset Without the Base on page 60. For instructions on
registering the handset, see page 20.
Setting Up the Phonebook
Your handset can store up to 100 names and numbers in your phonebook . Your phone shares memory between your
phonebook and Caller ID entries. Once you store 100 phonebook entries, Caller ID information will not be stored and
will only display at time of new incoming call. When all the phonebook entries are full, you will hear a beep and
MEMORY FULL appears. You cannot store any additional names and numbers unless you delete some of the existing
ones.
You can also use the phonebook entries or speed dial memory to store a group of numbers (up to 20 digits) that you
may need to enter once your call connects. This is referred to as chain dialing.
Creating Phonebook Entries
To store names and numbers in your phonebook, please follow these steps:
1. When the phone is in standby mode, press [ ] .
2. To create a new phonebook entry, move the cursor to select STORE
NEW, and press [select/ ] . STORE/EDIT NAME appears.
3. Enter the name for this entry (STORE/EDIT NAME).
Use the keypad to enter a name for this entry; the name can contain up
to 16 characters. (See Entering Text from Your Handset on page 12 for
instructions on entering text.) If you do not want to enter a name for this entry, your phone will store this entry
as . Press [select/
] when you are finished.