Uniden DCT7585 - Manual (Page 38)

37
Conferencing
If you have more than one handset, up to four people can
participate in a conference call. A three-way conference call
consists of an outside line and two stations. A four-way
conference call consists of an outside line, the base speaker
phone, and two handsets. You can easily join a call already in
progress.
From the handset, press [ / flash] or [ ] to join the call. From the
base, press [speaker]. You can hang up normally; the other
station will still be connected to the call.
Transferring a Call
You can transfer a call from one station to another.
From the base From the handset
1. During a call, press [int'com]
([hold/int'com/xfer] on the dual-keypad base).
2. The call will automatically be placed on hold, and
a paging tone sounds on all stations. (On the
dual-keypad base, you can select the handset
you want to talk with by pressing [1] through [4],
or press [*/tone] to page all registered
handsets.) To cancel the transfer, press
[speaker] or [int'com] ([hold/int'com/xfer]).
3. When another station accepts the transferred
call, you will be disconnected. If you want to
rejoin the call, press [speaker] again.
1. During a call, press [xfer/intercom].
2. Use [ ] or [ ] to select the station you want
to transfer the call to, then press [select/ ] .
The call will automatically be placed on hold, and
a paging tone sounds. To cancel the transfer,
press [ / flash] or
[ ] .
3. When another station accepts the transferred
call, you will be disconnected. If you want to
rejoin the call, press [ / flash] again or
[ ] .