Automatic squelch feature, Transmit hi/lo select, Monitor – Uniden UH039P User Manual

Page 7

AUTOMATIC SQUELCH FEATURE

The

is equipped with an Automatic Squelch System

which shuts off weak transmissions and unwanted noise.

UH039P

TRANSMIT Hi/Lo SELECT

Press and hold

for 2 seconds when the

unit is in Transmit Lo and it will switch to

Transmit Hi.

icon will appear on

display.

Press and hold

for 2 seconds again to

return to Transmit Lo setting.

icon will

disappear from display.

The RF transmit power of the

selectable Transmit Power 0.3/0.7 W.

'HI'

UH039P

dup

MONITOR

This feature enables users to listen for weak

signals on the current channel at the press of

a button.
To use monitor:

Press

. The

icon will flash once.

Release

within 1.5 seconds and the unit exits Monitor

mode.

Press and hold

for 2 seconds for continuous listening.

The receiver circuit will stay open, letting in both the noise

& weak signals.

icon flashes in this status.

To return to normal Receive mode press

icon

disappears or stops flashing in this status.

'RX'

mon