Uniden UH039P - Manual (Page 4)

If the battery level becomes low, the battery
indicator icon on the LCD begins flashing.
LOW BATTERY ALERT
When the batteries in the unit are low, the unit will go into a
Battery Low mode. The Transmit mode is disabled. Replace
the alkaline batteries immediately or if you are using the NiMH
battery pack, place the radio on the charge cradle to recharge
to continue using the radio.
3
To attach the belt clip:
To remove the belt clip:
Slide the belt clip until it snaps into place.
To remove the belt clip, press and hold
belt clip locker, slide the belt clip at the
same time until released.
BELT CLIP
Belt Clip Locker
Place the UH039P into the charge cradle. The charge light will
come on to indicate the unit is charging. Before operating the
UH039P, charge the battery pack for 16 hours.
Power Point
charge 1 charge 2
volume channel/ scan
dup mon
Do not charge alkaline or non
rechargeable batteries.