Uniden UH039P - Manual (Page 3)

Your UH039P unit uses the included NiMH battery pack for
power. The unit can be powered with optional 4 AAA ALKALINE
batteries.
GETTING STARTED
To avoid damage to the unit do not mix
old and new batteries.
To install the batteries:
1. Make sure your radio is off.
2. Remove the battery compartment
door by pressing the tab at the bottom
of the compartment door, allowing the
door to be removed.
3. Insert NiMH battery pack according to
the orientation on the battery pack.
OR Insert 4 AAA ALKALINE batteries (not
included) according to the polarity
symbols inside the battery
compartment.
4. Replace the battery cover.
BATTERY INSTALLATION
2
Uniden does not represent this product to be
waterproof. Do not expose this product to Rain
or Moisture.
INSTALLING THE CHARGE CRADLE
! Plug the AC adaptor into the rear of the charge cradle and
into the mains power.
Do not charge alkaline or non
rechargeable batteries.
OLD NEW