Uniden UH039P User Manual

Page 10

REPLY DELAY

While scanning, the

stops at a busy channel and

receives a transmission. When the received signal is over, the

unit will wait for 2 seconds for the return of the signal,

otherwise, the radio resumes scanning.

The

flashes during the Setting mode. Press channel/scan

to select

is shown on the display

when Keylock on is selected to on.

VOX

KEYLOCK ON/OFF

VOX

'oF'

VOX

is the automatic transmitting function by inputting voice

into the optional

headset mic without pressing the

button.

Press

two times momentarily in Stand By mode to enter

Sensitivity mode.

The current selected

setting will flash on the

display.

Press channel/scan

to adjust the

sensitivity. 1

is the highest sensitivity and 4 is the lowest sensitivity.

can be turned off by selecting

. The

icon is shown on

the display when

is selected to on.

The

icon blinks when the voice level is of a level where it

is possible to transmit at the current selected

sensitivity

level.

Press

two times momentarily to confirm the selected

setting and exit to standby.

Press

three times momentarily in Stand By mode to enter

Keylock mode.

To exit Keylock on mode, press and hold

to turn the unit

off and then turn on again.

VOX

'on' 'oF'.

UH039P

CTCSS

channel indicator

Press

to confirm the selected setting.

' '

PTT

While in Keylock on mode, the UH039P will still

receive transmissions.