Uniden UIP312 - Manual (Page 40)

9.4.3 Display Name
This menu item let you set a name to be displayed for LINE1 or LINE2 on top of the main
screen. If neither of the lines are registered you will see “Not registered” on top of the
screen.
1. Press the MENU button.
On the MENU screen, select Phone Setting.
2. Then select Display Name to input
digits or letters to display them on
the top of the LCD screen when the
phone is idle.
3. On the Display Name screen,
select Line 1 or Line 2. Input your display
name using the Dial Pad and press OK.
Display Name is password protected.
(Consult your network administrator to
change your display name.)
( See 8.10 Inputting Characters )
Note: 1. The default of the lines’ display name is the alias of each line. A line whose alias
is not set is indicated by “No Alias” like in above screen shot.
2. When inputting names, the DTMF “ * “ key and the DTMF “ # “ key are used for “/”
and “:” respectively. 8.10 Inputting Characters
Page 36