Uniden UIP312 - Manual (Page 36)

2. Dialing (Using Function key)
Including the SHIFT key, there are 8 Function keys.
To access Function keys F1 through F7, press the desired key without
pressing the SHIFT key.
SHIFT
F7 / F14
F6 / F13
F5 / F12
F4 / F11
F3 / F10
F2 / F9
F1 / F8
Note: The name information of the pressed Speed dial key is displayed for about 2
seconds. If no name, its number is displayed instead.
To access Function keys F8 through F14, first press the SHIFT key and
then press the desired key. When the shift key is pressed, the LED light on
the shift key will be turned on. SHIFT
F7 / F14
F6 / F13
F5 / F12
F4 / F11
F3 / F10
F2 / F9
F1/ F8
Note: The plastic cover of the speed dial label can be removed by inserting the tip of a
pen or pencil into each of the holes at either end of the label and lifting up.
Page 32