Uniden UIP312 - Manual (Page 34)

5. Select the number field and press the
right arrow key. Then input the phone
number that corresponds with the
previously entered name and press OK.
Up to 40 digits can be entered in the
number field. A pause may also be
entered for convenience with
automated answering systems.
( See 8.10 Inputting Characters )
5. Up to 32 digits of the phone number are
visible in the read-only Speed Dial window
that is shown on the right.
Note: 1. To enter a flash, press the FLASH button. To enter a pause, press the REDIAL
button. Each time you press Redial a one-second pause will be programmed.
2. “ ! ” and “ P ” on the screen stand for a flash and a pause respectively
3. It is recommended you enter “PAUSE” following “!” input, when you want to enter “!”.
TIP: The warning message “Read only” indicates that
you cannot modify the Speed dial name and
number.
Page 30