Uniden BR330T User Manual

Page 96

background image

96

correct modulation type for the system you are
programming.

Setting Channel Attenuation
(Conventional Channels Only)

Program System

Select the system

Edit Group

Select the group

Edit Channel

Select the channel

Set Attenuator

This setting controls whether the scanner attenuates
signals on this channel. Select your setting, then press E.

On - the channel is attenuated by about 18 dB.

Off - the channel is not attenuated.

Notes:

• The default setting is Off.
• For trunked systems, the attenuation is a system-

level setting.

• You can also toggle this setting by holding on the

channel and pressing

and E.

Setting Channel Lockout

Program System

E

Select the system

E

Edit Group

E

Select the group

E

Edit Channel

Select the channel

Set Lockout

Menu

Func

Menu