Uniden BR330T - Manual (Page 103)

103
Searching and Storing
Notes:
• You can also lock and unlock a search range by
pressing , selecting the search range then
pressing + L/O.
• If you select 0, the scanner then searches the
entire range one time.
• The default setting is 2 seconds for each
search range.
• The scanner moves to the next system or
search range after the hold time expires, any
current transmission ends, and the channel
delay time expires.
Editing a Service Search
You can change the way service search works for
each service.
Search for ...
Edit Service
Select your setting, then press the scroll control.
• Set Delay Time This setting determines how
long the scanner waits after a transmission ends
before resuming quick search or Close Call
operation. Select your setting, then press the scroll
control.
Off The scanner resumes immediately when
the transmission ends.
1-5 sec The scanner waits the set amount of
time after the transmission ends before
resuming.
• Set Attenuator This setting controls the
attenuator for search operation. Select your
setting, then press the scroll control.
Off The attenuator is off.
On Reception is attenuated by about 18 dB.
Menu
Func
Func